Pimoroni Raspberry Pi 4 Heat Sink - Gold Tone


The Pi4 is HOT. And if you want an attractive, passively-cooled way to keep it happy, look at this heat-sink sandwich.

In stock

SKU: 701301 Categories: , , Tag:


The Raspberry Pi 4 can definitely run hot. And if you want to cool it in style in a totally-passive manner, check this out.

This is a custom-machined aluminium 2-sided heat-sink that is practically a full-metal enclosure. It bolts your Raspberry Pi 4 between two slabs of anodised aluminum providing 10~15°C of cooling. There are slots and ports for all the necessary Pi accessories, but you may need to use some sort of pin booster to sufficiently clear the heatsink metal. Remember, it is metal, and can short pins out on any HATs you may want to mount on it.


  • Gold-tone Anodised Finish
  • Anodised aluminum top and bottom
  • Thermal pads
  • Hex bolts (key included)
  • Raspberry Pi 4 compatible


Be sure to use only one of the included sticky thermal pads on the center CPU.


Additional information

Weight .12 kg
Dimensions 10 × 7 × 4 cm


Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved