4-channel Relay Arduino Interface Shield

$14.59

It's a convenient way to add 4 channels of major power-control to your Arduino with a minimum of fuss.

In stock

SKU: 52268 Categories: , , Tag:
DESCRIPTION
RESOURCES
MORE INFO
REVIEWS

DESCRIPTION

If you want to drive an inductive load, or AC, or DC, or mysterious load, you can't beat a relay. It just works. It isn't fast, but it sure is powerful.

This shield plugs directly onto a standard Arduino footprint device, and you have 4 relays at your command.

Note: Please ensure the back of the board is insulated before attaching to an Arduino main board.  The green terminal blocks can short out against a metallic surface like the top of the USB connector!

Specifications:

  • Operating Voltage 5V
  • Operating Current 130mA
  • Max Switching Current 3A
  • Power voltage: 4.75~5V;
  • Power consumption (at 5V): 180mA;
  • Limit relay operation to no more than 30 cycles per minute
  • Relay maximum ratings AC 125V@3A, DC 24V@3A
  • 70 x 54 x 26mm (2.76 x 2.13 x 1.02")
  • Weight 1.41 oz (40 g)

Additional information

Weight 0.0441 kg
Dimensions 8 × 6 × 3 cm

REVIEWS

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart