MEMS microphone board


Newer MEMS microphones give much better response than older style electret mics, and they're smaller too.

Available on backorder

SKU: 50342 Categories: , , Tag:


This Sparkfun breakout for the ADMP401 MEMs microphone makes it easy to add the quality sound reception found in most cellphones to your project. It's super tidy, and sits flat for easy addition to your enclosure.

The breakout board's amplifier has a gain set to 67, which is well suited to the microphone's requirements. The output is set up to float at 1/2 Vcc (half the power provided) at quiet levels, and peaks at +/- 200mV when subjected to a speaking voice an arm's length away.


  • ADMP401 MEMS microphone module
  • 67 gain
  • -3dB roll off at 100Hz and 15kHz
  • 1.5 to 3.3VDC supply voltage
  • Should comfortably output 40mW
  • SNR of -62dBA

Additional information

Weight 0.0013 kg
Dimensions 4.5 × 2 × 1 cm


Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved