This is a neat little one-chip circuit we originally tuned for use with our "SM1" Stepper motors. We've presently sold out of the motor, but this circuit has proved to be a good unidirectional (1-way) driver for small stepper motors.
Well, the last batch of Escap gearmotors went very fast. Let's hope this batch lasts a bit longer!
Unlike the last set, this set has a higher reduction ratio of 663:1 instead of 362:1. This means it starts turning 0.46V (!) drawing only 3.3mA (!!)
It's a 3V rated motor, but our tests show that they spin quite nicely at 5V, drawing 4.2mA free (!!!) at 22rpm. Don't know what the stall current draw is, as we're scared to strip these delicate gears, but it's greater than 150mA. Check them out!
This is a neat little one-chip circuit we originally tuned for use with our "SM1" Stepper motors. We've presently sold out of the motor, but this circuit has proved to be a good unidirectional (1-way) driver for small stepper motors.
Solarbotics will be closing for the winter holidays as of Tuesday, December 24th. We will be open again December 30, 2002.
Every year a group of my friends have an engineering Secret Santa. The rules are simple: make something cool for under $20 that requires engineering to complete. In years past we’ve seen Google cardboard VR headsets that are 6DOF, match stick rockets, 3D printed fans that explode when used, 3D printed rockets with cardboard launch […]
Here at Solarbotics, we like to eat well. So, unfortunately after leaving a forgotten sausage roll in the microwave for several days we must search for a means of disposal and/or obvious prank to pull. Our immediate reaction was to place the rather stale pastry in the mouth of our office chimp, Herb. But now […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.