Project Monday: Musical Gears

Dave Hrynkiw
June 10, 2013

Sometimes we get the opportunity to help out select people who are developing projects for a good cause. One of those things dear to our hearts is inspiring children with science and electronics. So when John Porter came to us looking for a hand to make a musical gear project as part of an exhibit at the Children's Museum of Pittsburgh, we threw him some of our support. John attends Carnegie Mellon University in the Masters of Science program, and was working with fellow classmates Daniel Pfaff and Arden Rosenblatt to make a project described as "the ‘Musical Gear’. A single powered gear would exist at the center of a table. Children would be able to place Musical Gears on the table and mate them to the powered gear. Sensors on the edge of the Musical Gear would be triggered by coming into contact with the other gears. This would cause the gear to produce a musical tone on an internal speaker. By building up a chain of gears, the child would be able to create a variety of musical beats while learning about motion transfer through gears."

They chose the Ardweeny as an ideal brain for the project - it proved to be compact and powerful enough to handle the behaviors they were after. "Once the brain of the Musical Gear was selected, the rest of the design quickly fell into place. It would be powered by a 9V battery through a linear voltage regulator. It would include the circuitry for a soft latch power switch so that it could turn itself off. A small audio amplifier was designed to boost the signal from the Ardweeny. We also selected a short range optical switch as the primary sensor on the gear, meaning there were no moving parts that could be broken."

"Exhibit deployment was a great success. The gears were robust enough that not even the hordes of children were able to destroy them. Unfortunately, however, the musical beats that we had envisioned did not come to fruition. Instead, it was three days of chaotic, incessant beeping. The kids really seemed to enjoy it, though, even if we weren’t creating the next Mozart. And while we enjoyed our exhibit as well, we were certainly glad to pull the batteries out at the end. Maybe the world isn’t quite ready for the Musical Gear yet."

John was kind enough to shoot and send some video our way which shows off what the gears looked like in motion as the kids played with them. I have to admit... I kind of really want to try it out myself.

If you'd like to know a bit more (and see a few more images), you can download a PDF right here that describes how the project was conceived and implemented. It's well worth the read, and looks like one of the more unique ways we've seen the Ardweeny put to use.

MORE POSTS

July 6, 2017
Freezer Burn 2017 Pendant

Freezer Burn is an Alberta Regional Burning Man celebration annually creating a temporary community out on the prairie. A few of us here at Solarbotics attend, and having access to all of the neat technology, we make an effort to bring special projects to the festival. Lit up projects work well since the event is […]

February 23, 2018
Project: APA102-2020 MicroNova Custom LE...

I created this choker as a project to demonstrate the new MicroNova APA102-2020 LED strips. Photo by Yeti, edited by Batgirl These addressable LEDs are extremely small, less than 1/4 the size of a standard 5050 LED. This project was built using engineering sample standard MicroNova 99 LED / meter strips . The MicroNova strips we […]

February 23, 2018
APA102-2020 MicroNova Custom LED Choker

I created this choker as a project to demonstrate the new MicroNova APA102-2020 LED strips. Photo by Yeti, edited by Batgirl These addressable LEDs are extremely small, less than 1/4 the size of a standard 5050 LED. This project was built using engineering sample standard MicroNova 99 LED / meter strips . The MicroNova strips we are selling have 198/meter - […]

September 29, 2010
Arduino Uno and Neeeew York City!

We're back from the Open Source Hardware Summit and the Maker Faire! Did lots; learned lots; got lots of touristy things done too. One of the main highlights was meeting and listening to talks by three of the principle members of the Arduino team.  They took pity on English-speakers, and named the new revision the […]

1 2 3 252
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart